Skip to content
Memory and storage supply stays tight in 2026 — server DRAM contract prices climbed steeply in Q1. (TrendForce, Jun 2026)
Home›Catalog›Networking›Refurbished Juniper EX4300-48P Network Device

Refurbished Juniper EX4300-48P Network Device

Juniper EX4300-48P. Professionally refurbished, QC-graded. Sourced across China, QC-audited in our Shenzhen warehouse. Available new or refurbished — request a quote.

Refurbished
Placeholder · photo on request

Configuration

Ports48 x 10/100/1000BASE-T (PoE+)
Uplink Ports4 x 10GbE SFP+ (via optional module)
Virtual Chassis Ports4 x 40GbE QSFP+
Switching Capacity496 Gbps
PoE Budget900 W
MAC Address Table64,000
VLAN4,093
Jumbo Frame9,216 bytes
ARP Entries64,000
IPv4 Unicast Routes16,000 prefixes + 32,000 hosts
QoS Queues12 queues per port
Form Factor1U
PSU1100W AC, hot-swappable, redundancy 1+1
CoolingHot-swappable fans, front-to-back
OSJunos OS
Virtual ChassisUp to 10 devices, 320 Gbps backplane
ManagementJuniper Mist Wired Assurance (cloud management)
EVPN-VXLANSupported (EX4300-48MP)

Overview

The EX4300-48P is Juniper's heavier access switch with power on every port — the closet machine for floors dense with phones, cameras and access points, in estates that run Junos from the core outward. Refurbished, it delivers powered access at a per-port cost the new-equipment budget cannot answer. Powered ports at this density usually mean cameras and wireless overhead, and the chassis was built for exactly that load. Junos estates value that the closet speaks the same language as the core. Every switch reaches management on the Shenzhen bench, passes physical review, and is photographed and serial-logged before listing. It ships with 1-yr hardwaresys RTB. Stacking and uplink choices shape these orders — note both, count the closets, and request a quote.

Need accessories?

RAM, drives, cables, rails — we source everything that goes into the rack.

Every unit is QC-inspected

Standard included on every order. Engineering and Expert available on request.

See QC levels →

How we work

01

Consult & scope

We read your spec, advise on models, budget and timeline.

02

Spec & price

Our engineer fixes the build; the buyer prices it from vendors.

03

Contract

Quote, terms and documents — the rate is held, not floating.

04

Build & QC

Vendor build, then your chosen QC tier with a documented report.

05

Logistics & customs

Packing, then air from Shenzhen / Hong Kong · delivery quoted per shipment.

06

Delivery

Final inspection and door-to-door handover.

See the full process →

Common problems when buying networking

A vendor forcing rip-and-replace at end-of-sale

We source legacy and end-of-life Cisco, Juniper and Aruba so you extend a working network, not rebuild it.

Used gear with locked or expired licences

We say plainly what transfers and what you'll re-license, before you buy.

A config that mismatches your existing fabric

Send the model and we match line cards, optics and firmware to what you already run.

Live price — JUNIPER-EX4300-48P-REFURB

Optics and enterprise-hardware pricing moves with the market daily, so we don't publish a static number that would be wrong by tomorrow. Send the part number and quantity and you'll have today's real rate — usually within 48 hours, Gulf business time (UTC+4).

Quote-based pricing

Prices fluctuate daily — we quote today’s rate

Air from Shenzhen / Hong Kong · delivery quoted per shipment

Every model · new & refurbished

Same 1-yr warranty, same QC