Technical specifications
ASRock 4U10G-ICX2/2T — Full Technical Specifications
Official datasheet
Original spec sheet © Vendor. Hosted by hardwaresys for buyer reference. Specifications subject to vendor’s published documentation.
Full Specifications
| Form Factor | 4U Rackmount |
| Dimensions | 438mmx 845mmx 176.5mm (w/ fans) |
| Support Motherboard | SP2C621D32GM-2T |
| Buttons | Power button w/ LED; Reset button; NMI button; UID button w/ LED |
| LEDs | System fault LED; HDD activity LED |
| I/O Ports | 1 DB15 (VGA); 4 USB Type-A (USB3.2 Gen1); 2 RJ45 (10GbE) by Intel® X710-AT2, shares with Rear Panel I/O |
| IPMI LAN | 1 dedicated IPMI LAN, shares with Rear Panel I/O |
| Front Side Drive Bay | 12 Hot-swap 3.5" drive bays,; supports 8 NVMe (PCIe4.0 x4) / 6 SATA drives; supports 8 SAS/SATA drives by additional PCIe 8-port RAID/HBA card |
| Front Side Backplane | three 4-port NVMe/SAS/SATA passive backplanes |
| Internal Side | 2 M-key (PCIe3.0 x4/SATA) supports 22110/2280 form factor |
| Type | 3+1 CRPS |
| Output Watts | 1600W |
| Efficiency | 80-PLUS Platinum |
| AC Input | Lowline: 100-127V, Highline: 200-240V |
| Fan | 5 Middle Hot-swap 80x80mm fans, 5 Rear Hot-swap 80x38mm fans |
| Fail LED | Abnormal(DC on): LED ON (Solid Red); Normal: LED OFF |
| CPU | Support Dual 3rd Gen Intel® Xeon® Scalable Processors |
| Socket | 1+1 Socket P+ (LGA 4189) |
| Thermal Design Power | 270W |
| Chipset | C621A |
| Supported DIMM Quantity | 16+16 DIMM slots (2DPC) |
| Supported Type | DDR4 288-pin RDIMM, LRDIMM, NVDIMM |
| Max. Capacity per DIMM | RDIMM: up to 64GB, LRDIMM: up to 256GB, NVDIMM: up to 32GB |
| Max. DIMM Frequency | RDIMM/ LRDIMM: up to 3200 MHz; NVDIMM: up to 2666 MHz |
| Voltage | 1.2V |
| PCIe x 16 | Rear:; 10 FHFL dual-slot PCIe4.0 x16 on 4U10G_SWB96 or 20 FHFL single-slot PCIe4.0 x8 on 4U10G_SWB96 (attached to PEX88096); 1 FHFL single-slot PCIe4.0 x16 on 4U10G_SWB96 (direct link to CPU); Front:; 2 FHHL PCIe4.0 x16 via 4UXG_SL2P; 1 OCP3.0 PCIe4.0 x16 via 4UXG_SL2OCP3; *Please contact ASRock Rack for other required configuration |
| Additional PCIe switch | 2 PEX88096 |
| TPM Support | 1 (17-pin, LPC) |
| BMC Controller | ASPEED AST2500: IPMI2.0 with iKVM and vMedia support |
| Dedicated IPMI LAN | 1 Realtek RTL8211E for dedicated management GLAN |
| Controller | ASPEED AST2500 |
| VRAM | DDR4 4GB |
| UID Button/LED | UID button w/ LED |
| Other Button/LED | Power button w/ LED; Reset button; NMI button; System fault LED; HDD activity LED |
| Video Port | 1 DB15 (VGA) |
| USB 3.2 Gen1 Port | 2 Type-A (USB3.2 Gen1) |
| RJ45 | 2 RJ45 (10GbE) by Intel® X710-AT2, shares with front panel; 1 dedicated IPMI LAN, shares with front panel |
| BIOS Type | 32MB AMI UEFI Legal BIOS |
| BIOS Features | Plug and Play (PnP), ACPI 2.0 Compliance Wake Up Events, SMBIOS 2.8.0, ASRock Rack Instant Flash |
| Temperature | CPU Temperature Sensing; System Temperature Sensing; Card Side Temperature Sensing |
| Fan | Middle/ Rear Fan Tachometer; Middle/ Rear Fan Multi-Speed Control |
| Voltage | Vsoc,Vcpu, VCCM, VPPM, +1.8V, +3V,+5V, +12V, BAT, +1.8VSB, +3VSB, +5VSB |
| Temperature | Operating temperature: 10°C ~ 35°C / Non-operating temperature: -40°C ~ 70°C |
| Humidity | Non-operating humidity: 20% ~ 90% (non-condensing) |
Looking to buy this configuration?
We source this chassis OEM-new or refurbished, QC-inspected and shipped door-to-door. Quote-only pricing.