Technical specifications
IBM IBM FlashSystem 9500 — Full Technical Specifications
The FlashSystem 9500 is IBM's high-end all-flash array: dense enclosures, IBM's own flash modules rather than commodity drives, and a software stack that stretches across a grid of systems. It is bought by organisations running tier-one workloads where latency and ransomware resilience are both board-level concerns. Supplied new and configured with us.
Official datasheet
Original spec sheet © Vendor. Hosted by hardwaresys for buyer reference. Specifications subject to vendor’s published documentation.
Full Specifications
An array at this level is chosen on the protocol row and the media row, and both deserve slow reading. The protocol list spans fabric and ethernet transports at several speeds, and which of them your hosts can actually use is the gate on the whole purchase. The media row names IBM's own flash modules, which is the platform's defining choice: compression and endurance are handled in the module rather than in the controller, and the detection feature quoted there runs on the module too. Capacity figures are effective rather than raw, so they assume a reduction ratio your own data may not reach. The grid figure describes a fleet, not a box.
| Form Factor | 2U enclosure (FlashSystem 9600) |
| Effective Max Capacity | 11.8 PBe (single enclosure), 377 PBe (grid) |
| Max Bandwidth | 86 GB/s |
| Max IOPS | 6.3M (4K read hit) |
| Max I/O Ports | 32 |
| Memory | 1.5 TB / 3 TB |
| Host Protocols | 64Gb FC/NVMe-FC, 32Gb FC, 100/40Gb iSCSI/NVMe-TCP, 25/10Gb iSCSI/NVMe-TCP |
| Media | FlashCore Module 5 (FCM5) with ML-based ransomware detection <1 min |
Looking to buy this configuration?
We source this chassis OEM-new or refurbished, QC-inspected and shipped door-to-door. Quote-only pricing.